Silicone tube for Dosing pump Pro/KH Regent 1/3 mm (1 meter)

Liquid allowing to calibrate pH probe on 4.00 pH. Bottle of 50 ml.

Reef flare Bar2 Profile hanger is a set enabling the installation of two Reef flare Bar2 lights above the aquarium, ensuring optimal conditions for coral growth and even better enjoyment. We offer 4 sizes of brackets that you can easily adjust to the tank's width: 33 cm (13 in), 40 cm (16 in), 50 cm (20 in), and 60 cm (24 in). Installation requires the Reef flare Pro Profile.

Reef flare Pro Profile wire set is a complete set of hangers in sizes S, M and L. The set consists : wires, the Reef flare Pro Profile and hangers. The profiles are available in lengths of 100 cm (39 in), 120 cm (47 in), 140 cm (55 in) and 160 cm (63 in). The 100 cm (39 in) and 120 cm (47 in) long sets include 4 Reef Flare Pro profile hangers for mounting 2 lamps, the 140 cm (55 in) and 160 cm (63 in) long sets include 6 Reef Flare Pro profile hangers for mounting 3 lamps.

brak

It is a set for direct mounting of suspension wires to the lamp. The set has a possibility of regulation, the ropes are ended with screws, which are screwed directly into the lamp housing so we get extremely strong and durable fixing.

The Dosing Tube Holder is designed to organize 4 dosing tubes or power cords. Thanks to an adjustable screw, it can be attached to the edge of any type of tank or wall with a width of 8-21 mm. It works perfectly with the Dosing pump Pro X4.

Reef flare Pro arm M/L is a kit to directly mount Reef Flare lamps size M and L on an arm to the edge of the aquarium. Made of one piece of aluminum, strong and stable handle. The mount is infinitely adjustable in both axis.

Concentrated reagent for testing the carbonate hardness of water in a marine aquarium using the measuring station from Reef Factory - KH keeper Plus. This device independently collects water from the aquarium for testing, performs the measurement and saves the result in the Smart Reef application. You can check the results and history of measurements in the app at any time.

Ready reagent designed for testing carbonate hardness of water in a marine aquarium using the Reef Factory measuring smart device - KH keeper Plus. This device autonomously takes water from the aquarium for testing, performs the measurement, and saves the result in the Smart Reef app. You can check the results and measurement history in the app at any time.

The Reef flare Pro arm S is a kit for mounting Reef Flare size S lamps directly on the arm to the edge of the aquarium. Made from a single piece of aluminum, a strong and stable mount. The mount is infinitely adjustable in both axis.

A kit for dosing essential marine aquarium liquids, featuring four durable 2/5 mm hoses and a full set of mounts for easy installation on the aquarium edge. It's designed to work with most dosing and measuring devices, especially Reef Factory models like the Dosing Pump Pro X1, X4, KH Keeper Plus, Smart Tester, Dosing Pump CR, and others.

A set of lines to mount Reef Flare profiles and Reef Flare Pro profiles.

Replaceable dosing head for KH keeper Plus, responsible for drawing reagent to test for KH content.

Replaceable glass beaker dedicated to the KH keeper Plus device, intended for kH measurement.

The Multi-handle is a set of mounting rails allowing suspension above the aquarium:

Up to 4 units of Reef flare Bar 2

Up to 7 units of Reef flare Bar