Concentrated reagent for testing the carbonate hardness of water in a marine aquarium using the measuring station from Reef Factory - KH keeper Plus. This device independently collects water from the aquarium for testing, performs the measurement and saves the result in the Smart Reef application. You can check the results and history of measurements in the app at any time.
A stable KH level in the aquarium is important for maintaining optimal coral growth conditions. To take the best care of your aquarium, it is worth measuring this parameter regularly. 1 L of concentrated reagent and 9 L of RO/DI water yields 10 L of ready-to-use test fluid, which should last for approximately 1,429 tests.
Key features of the reagent:
highly concentrated
before use, mix it with RO/DI water in a ratio of 1:9
high repeatability and measurement accuracy - up to 0.01 dKH
1 L of concentrated reagent allows for an average of 1429 tests
non-toxic to corals
* Additional mounting accessories and spare parts
Reef Factory also offers Reagent Ready to Use 5 L
A set of lines to mount Reef Flare profiles and Reef Flare Pro profiles.
An advanced dosing head for precise and durable operation, compatible with Dosing Pump Pro X1/X4, Smart Tester, and KH Keeper Plus (2023 version), featuring easy replacement and high-quality components.
The Reef Flare Pro Profile is a mounting rail for easily installing Reef Flare, Pro, and Bar series lamps using accessories like handles and hangers. It comes in lengths of 100 cm, 120 cm, 140 cm, and 160 cm.
Replaceable glass beaker dedicated to the KH keeper Plus device, intended for kH measurement.
The Multi-handle is a set of mounting rails allowing suspension above the aquarium:
Up to 4 units of Reef flare Bar 2
Up to 7 units of Reef flare Bar
Replaceable mixer necessary for the operation of KH keeper Plus. It allows you to mix water collected from the aquarium with the reagent before testing.
Silicone flexible tube designed for the Dosing pump Pro and and KH keeper Plus Reagent. It is ideal for dosing essential minerals in marine aquariums.
A kit for dosing essential marine aquarium liquids, featuring four durable 2/5 mm hoses and a full set of mounts for easy installation on the aquarium edge. It's designed to work with most dosing and measuring devices, especially Reef Factory models like the Dosing Pump Pro X1, X4, KH Keeper Plus, Smart Tester, Dosing Pump CR, and others.
Liquid allowing to calibrate pH probe on 4.00 pH. Bottle of 50 ml.
The Reef flare Pro arm S is a kit for mounting Reef Flare size S lamps directly on the arm to the edge of the aquarium. Made from a single piece of aluminum, a strong and stable mount. The mount is infinitely adjustable in both axis.
Reef flare Pro Profile wire set is a complete set of hangers in sizes S, M and L. The set consists : wires, the Reef flare Pro Profile and hangers. The profiles are available in lengths of 100 cm (39 in), 120 cm (47 in), 140 cm (55 in) and 160 cm (63 in). The 100 cm (39 in) and 120 cm (47 in) long sets include 4 Reef Flare Pro profile hangers for mounting 2 lamps, the 140 cm (55 in) and 160 cm (63 in) long sets include 6 Reef Flare Pro profile hangers for mounting 3 lamps.
Reef flare Bar2 Profile hanger is a set enabling the installation of two Reef flare Bar2 lights above the aquarium, ensuring optimal conditions for coral growth and even better enjoyment. We offer 4 sizes of brackets that you can easily adjust to the tank's width: 33 cm (13 in), 40 cm (16 in), 50 cm (20 in), and 60 cm (24 in). Installation requires the Reef flare Pro Profile.
Reef flare Pro arm M/L is a kit to directly mount Reef Flare lamps size M and L on an arm to the edge of the aquarium. Made of one piece of aluminum, strong and stable handle. The mount is infinitely adjustable in both axis.
It is a set for direct mounting of suspension wires to the lamp. The set has a possibility of regulation, the ropes are ended with screws, which are screwed directly into the lamp housing so we get extremely strong and durable fixing.
Ready reagent designed for testing carbonate hardness of water in a marine aquarium using the Reef Factory measuring smart device - KH keeper Plus. This device autonomously takes water from the aquarium for testing, performs the measurement, and saves the result in the Smart Reef app. You can check the results and measurement history in the app at any time.
Concentrated reagent for testing the carbonate hardness of water in a marine aquarium using the measuring station from Reef Factory - KH keeper Plus. This device independently collects water from the aquarium for testing, performs the measurement and saves the result in the Smart Reef application. You can check the results and history of measurements in the app at any time.
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent