Reef flare Pro Profile

Replaceable mixer necessary for the operation of KH keeper Plus. It allows you to mix water collected from the aquarium with the reagent before testing.

Ready reagent designed for testing carbonate hardness of water in a marine aquarium using the Reef Factory measuring smart device - KH keeper Plus. This device autonomously takes water from the aquarium for testing, performs the measurement, and saves the result in the Smart Reef app. You can check the results and measurement history in the app at any time.

Reef flare Pro arm M/L is a kit to directly mount Reef Flare lamps size M and L on an arm to the edge of the aquarium. Made of one piece of aluminum, strong and stable handle. The mount is infinitely adjustable in both axis.

Replaceable glass beaker dedicated to the KH keeper Plus device, intended for kH measurement.

The Dosing Tube Holder is designed to organize 4 dosing tubes or power cords. Thanks to an adjustable screw, it can be attached to the edge of any type of tank or wall with a width of 8-21 mm. It works perfectly with the Dosing pump Pro X4.

High-quality probe that precisely measures the pH level in seawater. Dedicated to KH keeper Plus from Reef Factory. A special coating protects the probe against the deposition of bacteria and other contaminants that may adversely affect the results.

The Multi-handle is a set of mounting rails allowing suspension above the aquarium:

Up to 4 units of Reef flare Bar 2

Up to 7 units of Reef flare Bar

An advanced dosing head for precise and durable operation, compatible with Dosing Pump Pro X1/X4, Smart Tester, and KH Keeper Plus (2023 version), featuring easy replacement and high-quality components.

It is a set for direct mounting of suspension wires to the lamp. The set has a possibility of regulation, the ropes are ended with screws, which are screwed directly into the lamp housing so we get extremely strong and durable fixing.

Reef flare Bar2 Profile hanger is a set enabling the installation of two Reef flare Bar2 lights above the aquarium, ensuring optimal conditions for coral growth and even better enjoyment. We offer 4 sizes of brackets that you can easily adjust to the tank's width: 33 cm (13 in), 40 cm (16 in), 50 cm (20 in), and 60 cm (24 in). Installation requires the Reef flare Pro Profile.

brak

The Reef flare Pro arm S is a kit for mounting Reef Flare size S lamps directly on the arm to the edge of the aquarium. Made from a single piece of aluminum, a strong and stable mount. The mount is infinitely adjustable in both axis.

Reef flare Pro Profile wire set is a complete set of hangers in sizes S, M and L. The set consists : wires, the Reef flare Pro Profile and hangers. The profiles are available in lengths of 100 cm (39 in), 120 cm (47 in), 140 cm (55 in) and 160 cm (63 in). The 100 cm (39 in) and 120 cm (47 in) long sets include 4 Reef Flare Pro profile hangers for mounting 2 lamps, the 140 cm (55 in) and 160 cm (63 in) long sets include 6 Reef Flare Pro profile hangers for mounting 3 lamps.

Flexible hose for Dosing Pump, Dosing Pump Pro and Kh Keeper (1 meter).

Liquid allowing to calibrate pH probe on 7.00 pH. Bottle of 50 ml.